EGV+ Three band 40, 30 and 20m QRP CW Transceiver Kit

GENERAL:

  • Frequency coverage:  40 - 30 - 20m  (6 to 16MHz continuous tuning)
  • KB-2 Keyer built in. 
  • Tuning steps on two ranges: 10Hz-100Hz-1kHz and 10kHz-100kHz-1MHz.
  • Mode: CW
  • RIT function: without frequency limit
  • Power requirements: 12–14VDC  1-1.5A transmit, 0.12 – 0.4A receive.
  • Antenna impedance: 50 ohms.
  • Controls: Tuning-pushbutton. Band adjust. Volume. RF attenuator.
  • Board dimensions: 180 x 140 mm.
  • Weight: (no enclosure) 0.3 kg.

TRANSMITTER:

  • Emissión: CW.
  • RF output: 8W - 5W  40 to 20m.
  • Output TX Amp:  AB class amplifier.
  • High Quality output Spectrum.
  • Harmonics output: -45dBc or better below the fundamental frequency.
  • Other spurious signals: -50dBc or better below the fundamental frequency. 

RECEIVER:

  • Type: Superheterodyne. Balanced mixer.
  • Sensitivity: 0.2uV minimum discernible signal.
  • Selectivity: crystal ladder filter, 500Hz nominal bandwidth.
  • IF frequency: 4.915MHz.
  • AGC: on the receive path according to the received audio.
  • Audio output: 250mW, 4-8 ohms.

A medium experience level on radio and electronics assembly is required. It shouldn't be your first transceiver to build.

STOCK AGAIN on 2-3weeks

135,00 €

120,00 €

  • 0,35 kg
  • Sold Out