Made in Chinese industry

If you can't build your own QRP transceiver, E3GCY now offers assembled devices so you just have to plug them in and go on the air. All transceivers are rigorously tested in the EA3GCY laboratory and we offer you a full guarantee and service from Spain. Manufactured with high quality in china, however we will make everything else here. You will never have to send anything to other countries. 


SW-3B Three-band 40-30-20m QRP CW Transceiver

Ideal for portable use, SOTA, field day. 

Thank you W5KV for Review & Quick Operating Guide

Thank you G3CWI for Review video


SW-3B Three-band 40-30-20m CW Transceiver.

  • Dimensions: 104*71*25 mm
  • Weight: 180 gr.
  • Power supply: 8 - 15 VDC
  • Current: RX 45mA (<40mA display backlight off). TX about 0.8A at 12V.
  • Frequency coverage: 5-8MHz, 8-11MHz, 11-16MHz (receiving sensitivity peak on 40, 30 and 20m) Transmission on ham radio ranges.
  •  Two filters CW and SSB are automatically switched: Bandwidth: 400hz on CW, about 2kHz on SSB.
  • RIT/XIT: RIT range -9kHz to +9kHz. XIT range -30kHz to +30kHz.
  • Output power: about 5W 13.8V (depending on power supply voltage).
  • Side-tone: 600Hz.
  • Automatic keyer: Adjustable keyer speed. CQ automatic call with your callsign
  • Memories: each band has 8 storage frequencies.  
  • RX mode: CW, CWR, USB, LSB.
  • AGC: Simple audio AGC. S-Meter shows the relative strenght of the signal for refrerence only. 

Download english manual.

Download technical document complied by KL7KN.

SW
250,00 €

220,00 €

  • 0,45 kg
  • Sold Out

DR-4020 Dual-band 40-20m Digital QRP Transceiver

For digital radio such as FT8, FT4, JT65 etc. Perfect for portable use.

DR4020 Dual-band 40-20m Digital QRP Transceiver

  • Dimensions: 88*38*124 mm.
  • Weight: 320 gr.
  • Frequency range: 7.0 to 7.2Mhz and 14.00 to 14.35MHz.
  • Output power: 4W at 12.5V 
  • Mode: DIGI on USB
  • Direct audio signals to sound card. No need interface. Easy setup.
  • Automatic switching to TX by VOX.

Download english manual.

 

215,00 €

190,00 €

  • 0,45 kg
  • Sold Out

Handmade in Spain

If you can't build your own QRP transceiver, E3GCY now offers assembled devices so you just have to plug them in and go on the air. All transceivers are rigorously tested in the EA3GCY laboratory and we offer you a full guarantee and service from Spain.

Handmade in Spain in our workshop. Directly supervised by Javier, EA3GCY.

You will receive a certificate of handmade with the signed name of the hams radio who have worked it. 


ILER-40v3 VXO 40m minimalist QRP SSB Transceiver Handmade for portable use, SOTA, field day. 

ILER-40v3 40m QRP SSB Transceiver Handmade

This is the third generation of the legendary ILER-40 QRP Transceiver kit.

Improving features. Ideal for SOTA, radio backpack, bike etc.

6W out. VXO varactor, about 50kHz coverage. Very low current, 40-45 (no signal) RX, 1200-1500mA TX.

Handheld Microphone/Speaker with connectors INCLUDED

Download manual

175,00 €

  • 0,8 kg
  • Sold Out

ILER-40v3 and ARDU-5351 VFO 40m QRP SSB Transceiver Handmade for portable use, SOTA, field day. 

ILER-40v3 + ARDU-5351 40m QRP SSB Transceiver Handmade

This is the third generation of the legendary ILER-40 QRP Transceiver kit.

Improving features. Ideal for SOTA, radio backpack, bike etc.

>6W out. OLED display DDS-VFO, 7.0 to 7.2MHz coverage. current, 100-120mA (no signal) RX, 1200-1500mA TX.

Handheld Microphone/Speaker with connectors INCLUDED

Download manual

225,00 €

  • 0,8 kg
  • Sold Out